DJI Inspire 2 Bottom Camera Mount For-GP-Fusion-Sequoia-FLIR-AgroCam

Description

Bottom Mount a FLIR VUE, Sequoia Multi spectral or any type of GoPro style
auxiliary camera  like a 360 Fusion or MAX on TOP of your DJI Inspire 2 series .
This is link to all the installation manuals if you want see what is required:
https://drive.google.com/drive/folders/1aLXQQyOWpJ5DUHn5p3Vz3EXyEwhk8yO-?usp=sharing
DJI Inspire 2
DRONE NOT INCLUDED IN AUCTION
Weights:
Top Mounts I1 or I2 50-56g
Bottom Mounts I1 ro i2 15-20g
Typical mounting with fasteners for 1 device 6-10g
NEW --- SAMPLE VIDEO 5/16/20
Bottom Mount GoPro Hero 8 Black with EVO SS Gimbal
https://youtu.be/G9hMLUQlE8w
SAMPLE VIDEO 1/03/20
Bottom Mount GoPro Fusion 360
https://www.youtube.com/watch?v=lylMM1OsW4E&t=46s
NEW DESIGN (Note also in photos is our Inspire 2 top mount not included in this auction)
This is for Bottom mounting on a DJI Inspire 2
1-Includes adapter to accept any GoPro style mounting buckle (see photos)
(watch the video for stability tests in two positions above links)
2- Includes front GoPro adapter for lighting or other accessory (see photos)
3- For ultra smooth video mount a
EVO SS or Hohem XG1 Gimbal . Your can attach any camera that adheres to GoPro size standards to EVO or we can create a custom mount for you.
4- We offer a optional mounting frame for the EVO SS when used with the GoPro Hero 8 Black search for
EVO SS GoPro HERO8 BLACK Mounting Kit Dual Position
on Ebay
Optional :If you need a power pak for camera such as FLIR VUE or Parrot Sequoia it can be attached to the top mount which has 6 inches of mounting area
Adaptors for Parrot Sequoia and Flir VUE included .
Sequoia requires a top and bottom mount since it has a camera and sunlight component
NOTE:If you use one of the above gimbals it is best to turn off the DJI downward vision sensors so you
do not get a false positive error because of proximity of downward vision system to gimbal
This mount is not a
replacement
for the standard DJI front mount camera however you could use as your only camera if you do not have a front camera. There is no remote. I recommend one of the EVO wireless BT remotes for setting angle or you can do from phone app (if available).
(Custom mounting available send requirements for review) We have adapters for Sequoia and Flir VUE in the works.
COPYRIGHT © 2019 alienconcepts incorporated
Multiple units are available
MADE IN THE USA
General for All Mounts
We are constantly updating based on field use reports . As a result photos and instructions and components may change
at any time.
Disclaimer
We offer no guarantees  that a mount will perform up to your expectations since there are too many variables.
Use best practices for safe flying at all times . If unsure check with the FAA drone rules and regulations online.
We assume no responsibility for any damage or injury because of the addition of one of our mounts.
Payload Location and Clearance
When mounting payloads verify against recommended weights and sizes for your drone in manual or
contact manufacturer
If you mount anything on top of the mount make sure it has prop clearance a simple checking method is listed next:
1-Place you DJI Inspire 1 or 2 in travel model with props on and look down from directly above make sure
you have clearance with nothing protruding outside of the drone main body envelope into prop space
2-If you do have payloads in the body envelope or you are unsure make styrofoam size model and affix it with double stick
or velcro. Manually move the jack screw through its full range and make sure there is no interference with the props.
Safeguards
Use a safety lanyard on your mounts. This is one I use : Amazon
MIZUGIWA Stainless Steel Lanyard Cable Tether Safety Wire for Loss Prevention 2 Loops w/Quick Release Ring & Rubber Coating 12" Set of 10